Home » Posts tagged 'roofer'

Tag Archives: roofer

Homeowners Should Inspect Their Roofs For Damage and Wear

A roof protects the entire structure of a home or business against rain, snow, sun, and extreme temperatures. Homeowners should inspect their roofs for damage and wear.

Roofs

Look for dirt and debris, clogged drains, watermarks or pools, mold, and fungus. Also check the condition of chimneys, vents, and skylights. Visit https://www.delaware-roofing.com/ to learn more.

When a roof tile or shingle is damaged or missing, the first sign might be water leaking into your home. This might not seem like a big deal at first, but over time the damage can cause serious problems in the structural beams and foundation of your house. The leaks also expose the roofing materials to dry air and direct sunlight, which can quickly deteriorate and damage them.

In most cases, the damaged shingle will need to be replaced. This is fairly simple to do if you can work safely on the roof. Start by climbing up on the roof and sliding a flat pry bar underneath the damaged shingle. Gently pry upward to break the glue seal, then pull up the shingle and discard it. Now slide a new shingle into place, being careful not to pull or tear any adjacent shingles. Depending on the type of shingle, you may need to use additional roof cement to secure it in place.

As a general rule, try to avoid working on your roof in wet weather. It’s more difficult to complete repairs in the rain and can lead to more serious damage than you might expect. If you do need to work on your roof, wait for a warm, dry afternoon to do so.

You should also keep an eye out for damaged vents. Cracked housings on plastic vents and rusted seams on metal ones can be fixed with a little bit of caulk, but the best solution is usually to replace the vent altogether. This isn’t a job for beginners, so be sure to consult with a professional if you need help. You can also repair damaged flashing, which are the thin metal pieces that line roof valleys and prevent leaks around features such as chimneys and skylights. This is an easy fix for a skilled do-it-yourselfer, but if you aren’t comfortable working on your roof or the task seems daunting, consider calling a professional. They can handle most roof repairs quickly and cost-effectively. They will also be able to advise you on other, more significant fixes.

Damaged Flashings

Flashing is the thin metal pieces that line roof valleys and prevent leaks around chimneys, skylights, and other features. Over time, flashing can become corroded or develop holes, exposing your home to water damage. While many homeowners can make surface repairs to damaged flashing, it’s important to contact a professional roofing contractor if you notice any signs of a problem.

The elements can be hard on flashing, especially during winter. Heavy rains and ice may cause flashing to break apart or leak. This can lead to costly water damage in the home. Fortunately, it’s often relatively easy for a roofing contractor to repair damaged flashing.

Roof flashing can be repaired by removing the old piece and installing new flashing. The area should be cleaned thoroughly, and the flashing should be sealed with roofing cement to ensure a watertight seal.

If the roof flashing is in very poor condition, it may be best to remove it entirely and replace it with a new piece. This is usually the case with extensive rust or corrosion, and it’s important to address this issue as soon as possible to avoid further damage.

In some cases, it may be necessary to install a “step” flashing in order to create a secure and watertight connection between the shingles and the house’s siding. This type of flashing is typically installed where the shingles meet the fascia boards, and it’s important to follow best practices when completing this project.

In general, the most common types of roof flashing are made from sheet metal or copper. However, plastic flashing is also sometimes used. Flashing is designed to tightly connect chimneys, windows, and other roof features to the roof itself, making it watertight. The problem is that flashing can be vulnerable to damage and deterioration due to constant exposure to the elements, such as snow, wind, and hail. Damaged flashing can lead to leaking, which in turn can damage the shingles and cause leaks throughout the home. Leaks in the flashing can be especially damaging because they can erode the fascia board and stain the siding.

Damaged Gutters

Gutters are important for channeling water off your roof and away from the foundation of your home. If your gutters are damaged, they may not work properly and can cause serious problems for the structure of your home.

Clogged gutters are common, especially in fall when leaves, seeds, moss, and other organic material pile up. This clogs your gutters, which prevents water from flowing down to the ground and exposes your home to excessive moisture. This can lead to mold growth, foundation cracks, landscape erosion and basement flooding.

In addition, overflowing gutters can cause water damage to the ceilings and walls of your home. This can result in ugly brown spots on the ceilings and wall stains. If left unattended, this can also lead to rot and mold which can be difficult and expensive to repair.

Gutter damage is another issue that can be easily repaired by a professional. One of the most common causes of gutter damage is a fallen tree limb or branch that hits the gutter and rips a hole in it. To fix this, remove the damaged section of gutter and clean off any rust or debris that is stuck inside the hole.

Once the gutter is clean, cut a piece of wire screening patch that is big enough to cover the hole in the gutter and wrap it around the outside edges of the gutter. Next, spread a thin layer of roof cement over the screen and press it down into the gutter to seal it.

If the holes in your gutter are from missing sections or downspouts, you can replace them by removing the old spikes and putting in new ones. To do this, first, use a ladder to get to the gutter and remove the old spikes with a hammer or pry bar. Next, measure the height of your downspout and mark that on a new gutter section. Use a level to ensure the gutter is straight and then put in the new spikes, using a hammer or pry bar to tap them in.

Inspect your gutters regularly to check for any signs of damage or clogs. If you notice any of these issues, call a professional to have them repaired as soon as possible to protect your home.

Damaged Soffit

The soffit and fascia boards that run along the edges of your roofline are more than just decorative elements. They serve a crucial purpose, protecting the roof from excess moisture and pests. Specifically, soffits head off winds and humid air that could otherwise rot the edge of the roof or the rafters, while fascia protects the eaves from animals such as squirrels, birds, and bees that might try to nest in the open space between the rafter tails. These essential components also help ventilate your attic, which improves home energy efficiency by limiting the loss of heated and cooled air.

Because these important protective elements aren’t highly visible from the ground, they are easy to overlook until they are damaged. But once they are, a quick and inexpensive repair can prevent much more expensive problems in the future. Keep an eye out for signs such as peeling paint or rot, which may indicate the need for soffit and fascia repairs.

Often, soffit rot is caused by water leaks and harsh weather, but it can be further complicated by an infestation of birds, squirrels, or other animals that are nesting inside your roof. A soffit that is infested with pests should be repaired as soon as possible, before the problem spreads to the rest of your roofing system.

The good news is that most of the time, you can easily inspect and repair the soffit and fascia yourself, without removing any roof shingles or flashing. Simply look for damage such as rot or mold, then remove the affected section of the soffit and replace it with a new piece that is both durable and visually appealing. If the fascia is rotting or covered with mold, it’s also a good idea to replace it at the same time, as this will ensure that your roofline is seamless and long-lasting. If you’re not comfortable doing this yourself, or you don’t have the time, contact a local roofing repair company to do it for you. A reputable company will have the tools and experience necessary to complete a fast and affordable repair that will last for years to come.